A router’s LAN port to a switch/hub’s normal portĭifferent from the straight-through Ethernet cable, crossover network cable uses two different wiring standards on both ends (connector A and connector B). One hub to another hub connecting a normal port on both sides.One switch to another switch connecting a normal port on both sides.is a type of twisted pair cable used to connect two devices of the same type such as “DTE to DTE” or ”DCE to DCE” in the following situations: That is, both ends (connector A and connector B) use T568A wiring standard or both ends use T568B wiring standard with the same color.Ĭrossover Cable vs Ethernet Cable: What Is A Crossover Cable?Ĭrossover cable such as Cat5, Cat5e crossover cable, etc. Straight through cable uses the same wiring standard on both ends. While, in T568B wiring standard, there are two color order exchanges compared with T568A, pin 1 in exchange for Pin 3 and pin 2 in exchange for Pin 6. For T568A, the color order of the 8 pins are white, green, white orange, blue, white blue, orange, white brown, and brown from pin 1 to pin 8 respectively. They differ in the order of the 8 cable colors. As we know, T568A and T568B are two standards recognized by ANSI, TIA and EIA for wiring Ethernet cables. Ethernet cable, it is inevitable to think of their wiring system. Connect 2 switches/hubs with one of them using an uplink port and the other one using normal portĪctually, when it comes to crossover cable vs.A router’s LAN port to a switch/hub’s uplink port.A router’s WAN port to a cable/DSL modem’s LAN port.A computer to a switch/hub’s normal port.A computer to a cable/DSL modem’s LAN port.is a type of twisted pair cable primarily used in local area networks to connect two different types of devices such as in the following situations: Therefore, when doing a comparison of crossover cable vs Ethernet cable, it is actually the comparison between Ethernet crossover cable and straight through cable (referred as Ethernet cable in this post).Ĭrossover Cable vs Ethernet Cable: What Is An Ethernet Cable?Įthernet cable/straight through cable such as Cat5, Cat5e and Cat6 cable, etc. Straight through cable is a type of common network cable and is widely used, while crossover cable is a special Ethernet cable type. Ethernet patch cable is normally divided into crossover cable and straight through cable by different networking applications.
0 Comments
Leave a Reply. |